Additionally for the usual mind – and short-cone crusher, but in addition in between them, namely the distinction in between the medium-sized cone crusher machine that may be employed could also be employed inside broken chronology. Standard, medium-sized, brief mind cone crusher. The principal distinction could be the crushing chamber profile various shapes. Therefore, for the mine discharge particle sizing and particle sizing are also different.
Test without any load must be done after the above installation, check whether installation meets requirement. Repair the machine when any trouble happens at the moment.
1. Check joint parts before starting crusher.
2. Use hand to make transmitting part without any load move 2-3 circles, then start crusher when no trouble happens.
3. Start oil pump before starting crusher. Make sure every lubricating point lubricated and oil return box, then start crusher.
4. Test without any load must last more than 2 hours.
5. Test without any load must meet the following requirements:
①Cone crusher cannot autorotate 15 r/min around its central line.
② Cone gear cannot make periodical noise.
③ Lubricating system must meet the following requirements:
The installation of the lubrication device
1. The lubrication device can be installed as the assembling drawing and also the device can be installed as specific condition locally, however the assembling drawing and tools needed should be prepared by the buyer.
2. To assemble the lubrication device, first to make sure the lubricating oil returns smoothly.
3. The lubrication device should be installed before installation of the crushing cone crusher machine part, because if any problem of lubrication device, it is easy to fix or maintain.
4. The device adopts electric refrigeration S155 type thin-oil lubrication station,
In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes) Most users ever online was 207 on 23 Jul 2012, 05:45
Users browsing this forum: No registered users and 1 guest
The views and comments entered in these forums are personal and are not necessarily those of the management of this board. The management of this board is not responsible for the content of any external internet sites.